Masonry structures comprise a significant portion of the historical building stock all over the world. Previous studies have clearly pointed out that unreinforced masonry buildings are vulnerable against extreme loading conditions, such as seismic actions. Therefore, strengthening is inevitable in most …

Energy dissipative steel cushions (EDSCs) are simple units that can be used to join structural members. They can absorb a substantial amount of seismic energy due to their geometric shapes and the ductile behavior of mild steel. Large deformation capability and stable hysteretic behavior were obtained …

Technische mogelijkheden voor het verduurzamen van woningen in Kantens/Stitswerd en Loppersum

Mild steel is relatively low-cost and easily accessible material to fabricate some structural members. It would be a significant advantage if seismic energy dissipaters that are used in structures constructed in the earthquake prone areas, could also be produced on site. In this paper, a promising seismic …

Existing unreinforced masonry buildings in seismically active regions are in urgent need of consolidation and preservation against seismic action to prevent damage and loss of financial resources. In this research, an experimental study of externally confined brick masonry piers, which are frequently …

Precast concrete structures are preferred for facilities with large open areas due to easiness in construction. Such structures are typically composed of individual columns and long-span beams, and are quite flexible and of limited redundancy. In this paper, nonlinear dynamic analyses of a typical such …

This paper investigates the limits and efficacies of the Fiber Reinforced Polymer (FRP) material for strengthening mid-rise RC buildings against seismic actions. Turkey, the region of the highest seismic risk in Europe, is chosen as the case-study country, the building stock of which consists in its …

The lack of in-depth understanding of the seismic behavior and ductility of precast concrete structures makes it difficult to reach to ductility demand which could be exhibited during an earthquake. The limitations are mainly related to the beam-to-column connections as the main load transfer paths. …